If your ExtraHop system is deployed in a data center or other remote environment, you might need to access the console and power-management features through a remote connection. Remote access is available on the ExtraHop system through the Integrated Dell Remote Access Controller (iDRAC). After you enable and configure iDRAC, you can power cycle the system, view console messages, and review hardware monitoring and boot logs. The iDRAC interface is enabled by default on all ExtraHop appliances, except the EDA 1100 and EDA 1200, which do not have an iDRAC interface. You can download updates for the iDRAC controller firmware from the  Dell Technologies website . Accessing the iDRAC When the appliance is running, the LCD displays the existing IP address. Under the LCD, press the checkmark button between the two arrows. Highlight  iDRAC  and press the checkmark button. Highlight  IP  and press the checkmark button. Write down the IP address that appears on the LCD. In a web browser, type

Update:  Microsoft has now made official Windows 10 21H1 ISO images of a new build available for insiders in Beta channel. The new 21H1 build in question is Build 19043.867. This build has already been made available to Enterprise customers for commercial Pre-release validation. So, probably it will be the final public release build too. You can click on the link below to download the official Windows 10 21H1 ISO images. You need to sign in with your insider account to download the ISO images. ISO Download link Original: Microsoft recently released the Windows 10 version 21H1 Build 19043.844 to the insiders in Beta Channel. Now it has also made the official Windows 10 version 21H1 (Build 19043) ISO images available to download. Just keep in mind that this is still an insider build. You can click on the link below to download the Windows 10 version 21H1 ISO images. You need to sign in with your insider account to download the ISO images.